Quick'n Easy Adesive Remover |
Hazard Statements
EYE CONTACT: Wear safety glasses with side shields, or face mask. Eyewash should be available. May irritate eyes. Flush eyes with large amounts of fresh water for 15 minutes. Get medical attention. • SKIN CONTACT: Wear appropriate clothing. Wear chemical resistant gloves. Safety shower should be available. Prolonged contact may cause skin irritation. Flush area with large amounts of fresh water; use soap. Launder clothing before reuse. • INHALATION: Use NIOSH approved respirator if conditions generate mists or vapors. Use with adequate ventilation. High concentrations may cause irritation to respiratory tract, headaches and dizziness. Remove from exposure to fresh air. Keep at rest. If breathing is difficult, give oxygen. If breathing has stopped, give artificial respiration. Call physician immediately. • INGESTION: Do not take internally. May have serious effects if ingested, or aspirated into lungs while vomiting. If ingested, DO NOT induce vomiting. Keep at rest. Get immediate medical atten
Precautionary Statements
. FIRE AND EXPLOSION FLASH POINT: 81 Degrees Fahrenheit METHOD TCC BOILING POINT: 197 Degrees Celsius (End Point) GENERAL HAZARD: FLAMMABLE LIQUID. Can form flammable mixtures at temperatures at or above flash point. “Empty” containers retain liquid and/or vapors. Do not pressurize, cut, weld, braze, solder, drill, grind or expose containers to heat, open flame, sparks, static electricity or other sources of ignition. Empty containers must be properly disposed of. EXTINGUISHING MEDIA: DO NOT use direct water stream. Use water spray, CO2, dry chemical or water fog spray. Use NFPA Class B extinguisher for Class I C liquid fire. Use self-contained breathing apparatus and protective clothing. Cool exposed containers with water. 6. SPILL CONTROL PROCEDURES ACTION: Wear appropriate clothing and safety equipment. Small Spill: Wipe or mop; dispose of in DOT approved container. Large Spill: Absorb spill sand or other non-combustible waste material; dispose in DOT approved containers. Keep from sewers, storm drains, surface waters and soil. DISPOSAL: Dispose of contaminated product, clean-up materials and empty containers according to Federal, State and Local regulations. 7. PHYSICAL / CHEMICAL PROPERTIES REACTIVITY: Stable CONDITIONS/MATERIALS TO AVOID: Isolate from oxidizers, heat, sparks, electric equipment, other sources of ignition and open flame. HAZARDOUS POLYMERIZATION: Will not occur. 8. STORAGE AND HANDLING Store in a cool, dry, well-ventilated place away from all heat, flame and ignition sources. Do not store above 120 degrees F. Electrically ground all equipment. Use non-sparking tools. Keep container closed tightly when not in use. “Empty” container retains liquid and/or vapors and is hazardous and must be properly disposed of. Wash thoroughly after using. Avoid skin, eye and mouth contact
Manufacturer information
Name
Auto Tech Mfg. LLC
Phone
(800) 545-8624
Address
503 NE Lawless Lane
Grants Pass, OR 97526
USA
Centennial School District 12
Local data
SKU # 13-032
